Skip to content

How to Refinish a Table That Is Not Real Wood

refinishing non wood table surfaces

I've got a secret to share with you: refinishing a table that's not real wood is easier than you think.

I've been there, feeling trapped with a piece of furniture that seemed impossible to revive. But fear not, my friends.

With a little know-how and some elbow grease, you can transform that faux wood table into a stunning masterpiece.

So, let's break free from limitations and embark on a journey of liberation as we dive into the art of refinishing.

Table Refinishing Guide

I found an excellent table refinishing guide that has helped me transform my old table into a beautiful piece of furniture. The guide provided step-by-step instructions, along with detailed explanations and helpful tips. It was clear that the author had a deep understanding of the refinishing process and was eager to share their knowledge with others.

The first thing the guide emphasized was the importance of preparation. It stressed the need to thoroughly clean the table and remove any existing finish or paint. I followed the guide's recommendation and used a gentle cleaner to remove dirt and grime, and then used a paint stripper to take off the old finish.

Next, the guide walked me through the sanding process. It explained the different grits of sandpaper to use and suggested starting with a rougher grit and gradually moving to a finer one. I carefully sanded the surface, making sure to remove any imperfections and create a smooth and even surface.

After sanding, the guide suggested applying a wood conditioner to ensure an even stain absorption. It also provided a list of stain options and recommended using a brush or cloth to apply the stain in even strokes. I followed these instructions and was amazed at the rich and vibrant color the stain gave to the table.

Finally, the guide explained the importance of protecting the newly refinished table. It recommended using a polyurethane or varnish to seal the surface and provide durability. I followed this advice and applied multiple coats of polyurethane, allowing each coat to dry before applying the next.

In conclusion, the table refinishing guide I found was a valuable resource that helped me transform my old table into a stunning piece of furniture. The guide's detailed instructions and expert tips gave me the confidence and knowledge I needed to successfully refinish my table.

Now, it's time to move on to the next section where I'll provide a quick answer list for those looking to refinish their table in a hurry.

quick answer

Although refinishing a table can be a time-consuming process, a quick answer would be to use a furniture touch-up marker to cover any scratches or blemishes on the surface. This method is ideal for tables that aren't made of real wood, such as veneer or laminate tables.

Here are three reasons why using a furniture touch-up marker is a liberating solution for table refinishing:

  1. Ease of use: Furniture touch-up markers are designed to be user-friendly, making it easy for anyone to touch up their table. Simply choose a marker that matches the color of your table, and apply it to the scratches or blemishes. The marker's ink will blend seamlessly with the surface, effectively hiding any imperfections.
  2. Time-saving: Refinishing a table can be a lengthy process that involves sanding, staining, and sealing. However, using a furniture touch-up marker allows you to skip these steps and achieve instant results. In just a matter of minutes, your table will look refreshed and as good as new.
  3. Cost-effective: Refinishing a table can also be expensive, especially if you hire a professional or invest in specialty tools and materials. On the other hand, furniture touch-up markers are affordable and readily available. They offer a budget-friendly alternative to refinishing, allowing you to transform your table without breaking the bank.

Overall, using a furniture touch-up marker is a quick and liberating solution for refinishing tables that aren't real wood. It saves time, money, and effort, while still providing impressive results. So go ahead and give it a try – you'll be amazed at the transformation it can bring to your table.

Key Takeways

My key takeaways from this discussion are the ease of use and affordability of furniture touch-up markers for refinishing tables that are not real wood. During the discussion, it became clear that these markers are a great solution for those who want to give their tables a fresh look without the hassle and expense of traditional refinishing methods.

One point that was emphasized in the discussion was the wide range of colors available in touch-up markers. This allows for a seamless blending of the repaired area with the rest of the table, creating a natural and cohesive appearance. Additionally, touch-up markers are very user-friendly, making them accessible to anyone, regardless of their level of experience or expertise in furniture refinishing.

To illustrate the benefits of using touch-up markers, I have created a table showcasing some of the advantages and disadvantages:

Advantages Disadvantages
Easy to use Limited repair capacity
Affordable Temporary solution
Wide color range May require multiple applications
Seamless blending Limited durability


To summarize, the key takeaways from the discussion on refinishing tables that aren't real wood are the convenience and affordability of using furniture touch-up markers.

As someone who's had experience refinishing tables, I can confidently say that furniture touch-up markers are a game-changer when it comes to reviving the appearance of non-wood tables.

One of the main advantages of using furniture touch-up markers is the convenience they offer. Unlike traditional refinishing methods that require stripping, sanding, and staining, touch-up markers allow you to quickly and easily cover up scratches, scuffs, and other imperfections. With just a few strokes of the marker, you can restore the table's color and make it look like new again.

Another benefit of using touch-up markers is their affordability. Refinishing a table can be an expensive undertaking, especially if you hire a professional or invest in expensive materials. However, furniture touch-up markers are a cost-effective alternative that can provide impressive results without breaking the bank. These markers are readily available at most home improvement stores and are much cheaper than purchasing a whole refinishing kit.

In conclusion, if you have a table that isn't real wood and is in need of a refresh, furniture touch-up markers are a convenient and affordable solution. They allow you to quickly and easily cover up scratches and imperfections, restoring the table's appearance without the need for extensive refinishing.

Detailed Instructions

I've refinished many tables that aren't real wood, and I can tell you that it requires a different approach than working with solid wood. Here are the detailed instructions on how to refinish a table that isn't real wood:

  • Alternative Refinishing Methods:
  • Paint stripping: Use a chemical paint stripper to remove the existing finish.
  • Sanding: If the table has a thin veneer, be careful not to sand through it.
  • Refinishing with stain or paint: Choose a stain or paint that works well with the table's material.
  • Tools and Materials Needed:
  • Chemical paint stripper
  • Sandpaper (various grits)
  • Paintbrushes or foam rollers
  • Stain or paint of your choice
  • Polyurethane or clear coat for protection
  • Step-By-Step Refinishing Process:
  1. Start by removing any hardware or accessories from the table.
  2. Apply the chemical paint stripper according to the manufacturer's instructions.
  3. Use sandpaper to remove the old finish, working in the direction of the wood grain.
  4. Apply the stain or paint of your choice, following the product instructions.
  5. Finish off with a protective coat of polyurethane or clear coat.

Alternative Refinishing Methods

I can't wait to learn more about the alternative refinishing methods for my table.

As someone who desires liberation, I'm always seeking new ways to approach tasks and break free from traditional methods.

Refinishing a table that isn't real wood can be a challenge, but with the right techniques, it's possible to achieve stunning results.

One alternative method that I'm eager to explore is the use of paint. By choosing a high-quality paint specifically designed for furniture, I can transform the look of my table while also providing it with a protective coating.

Another method that intrigues me is the use of laminate or veneer. These materials can be applied over the existing surface, giving the table a fresh and modern appearance.

I'm excited to delve deeper into these alternative refinishing methods and discover the freedom they offer.

Tools and Materials Needed

For this project, you will need sandpaper, a paintbrush, a putty knife, and primer, but don't forget to also gather the desired paint color and a clear sealant. These tools and materials are essential for refinishing a table that is not real wood. As someone who has gone through the process multiple times, I understand the importance of having the right supplies to achieve a successful outcome. Let me break it down for you in a table:

Tools Materials
Sandpaper Primer
Paintbrush Desired paint color
Putty knife Clear sealant

Having these items on hand will make the refinishing process much smoother and more efficient. Now that we have everything we need, let's dive into the step-by-step refinishing process.

Step-By-Step Refinishing Process

After gathering all the necessary tools and materials, start by thoroughly cleaning the table using a damp cloth, then wait for it to dry before proceeding with the step-by-step refinishing process.

Once the table is clean and dry, begin by sanding the surface to remove any existing finish or imperfections. Use a medium-grit sandpaper to start and gradually move to finer grits for a smoother finish.

Next, apply a primer to ensure better adhesion of the paint or stain. Once the primer is dry, apply the desired paint or stain using even strokes, following the grain of the wood. Allow it to dry completely before applying a second coat if needed.

Finally, seal the surface with a protective topcoat to enhance durability and longevity.

Transitioning into the subsequent section about 'tips for achieving a professional finish', it's important to pay attention to details such as sanding in between coats, using high-quality brushes or applicators, and taking your time to achieve a smooth and flawless finish.

Tips for Achieving a Professional Finish

To achieve a professional finish on your table, it's crucial to consistently sand in between coats and use high-quality brushes or applicators for a flawless outcome.

When refinishing a table that isn't real wood, it's important to take extra care to ensure the final result looks authentic and professional.

Begin by thoroughly cleaning the table surface and removing any existing finish.

Next, apply a coat of primer specifically designed for non-wood surfaces. This will create a smooth base for the paint or stain to adhere to.

Once the primer is dry, sand the surface lightly to remove any imperfections.

Apply multiple thin coats of paint or stain, allowing each coat to dry completely before adding the next.

Lastly, finish with a protective sealant to ensure the longevity of your refinished table.

Common Mistakes to Avoid

I'll go over some common mistakes to avoid when refinishing a table that is not real wood, so you can achieve the best results. It's important to approach this project with care and attention to detail, as working on a non-wood table requires a slightly different technique. Here are some mistakes to steer clear of:

Mistake Solution
Not prepping the surface properly Thoroughly clean the table and remove any old finishes or coatings before starting. Use sandpaper to create a smooth surface for the new finish.
Using the wrong type of paint or stain Choose a paint or stain that is specifically designed for non-wood surfaces. This will ensure proper adhesion and longevity of the finish.
Skipping the primer Apply a primer before painting or staining to enhance adhesion and prevent the finish from peeling or chipping.

Final Thought

One thing I've learned from this discussion is that using at least three coats of polyurethane will provide a durable and long-lasting finish for a table that isn't real wood. When refinishing a table that isn't made of real wood, it's essential to choose the right products and techniques to achieve a beautiful and durable result. Polyurethane is a popular choice because it creates a protective layer that can withstand daily use and provide resistance to scratches, spills, and heat.

To ensure the best outcome, it's crucial to prepare the table's surface properly before applying the polyurethane. This involves cleaning the table thoroughly, removing any existing finish or paint, and sanding it to create a smooth and even surface. Once the surface is prepared, apply the first coat of polyurethane using a brush or a roller, making sure to cover the entire table evenly. Allow the first coat to dry completely before applying subsequent coats.

The number of coats required may vary depending on the desired level of protection and the quality of the polyurethane used. However, it's generally recommended to apply at least three coats for maximum durability. Be sure to lightly sand the surface between coats to remove any imperfections and create a smooth finish.

By following these steps and using multiple coats of polyurethane, you can achieve a durable and long-lasting finish for a table that isn't real wood. This won't only protect the table's surface but also enhance its appearance, making it a beautiful and practical addition to your space.

Refinishing a table can be a rewarding project, and with the right techniques, you can transform an old or damaged table into a stunning piece that will stand the test of time.

Frequently Asked Questions

What Are Some Alternative Materials to Real Wood That Can Be Used for Table Refinishing?

Some alternative materials for table refinishing include laminate, veneer, and engineered wood. These materials can mimic the look and feel of real wood while providing durability and affordability.

Can I Use the Same Refinishing Techniques for Tables Made of Laminate or Veneer?

Yes, you can use the same refinishing techniques for tables made of laminate or veneer. Sanding, priming, and painting can transform the surface. However, be cautious not to sand too aggressively and damage the thin layer.

Is It Possible to Refinish a Table Without Sanding It?

Yes, it is possible to refinish a table without sanding it. There are alternative methods such as using a liquid deglosser or a chemical stripper to remove the existing finish before applying a new one.

What Tools and Materials Are Needed for Refinishing a Table That Is Not Real Wood?

To refinish a table that isn't real wood, you'll need a few tools and materials. Start with a primer to ensure adhesion, then choose a paint or stain that suits your desired finish.

Are There Any Special Considerations or Precautions to Take When Refinishing a Table That Is Not Real Wood?

There are special considerations when refinishing a table that is not real wood. It's important to determine the material, choose the right products, and test a small area first to ensure compatibility and avoid damaging the table.

Go Top